Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 252)

238 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network WAN, Dynamic DNS Commands
BR5181>admin(network.wan.dyndns)>
Description
Displays the Dynamic DNS submenu. The items available under this command include:
For an overview of the Dynamic DNS options available using the applet (GUI), see “Configuring
dynamic DNS” on page 105.
BR5181>admin(network.wan.dyndns)> set
Description
Sets the access point’s Dynamic DNS configuration.
Syntax
Example
admin(network.wan.dyndns)>set mode enable
admin(network.wan.dyndns)>set username percival
admin(network.wan.dyndns)>set password mudskipper
admin(network.wan.dyndns)>set host greengiant
For an overview of the Dynamic DNS options available using the applet (GUI), see “Configuring
dynamic DNS” on page 105.
BR5181>admin(network.wan.dyndns)> update
Description
Updates the access point’s current WAN IP address with the DynDNS service.
set Sets Dynamic DNS parameters.
update Sets key exchange parameters.
show Shows the Dynamic DNS configuration.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
set mode enable/disable Enables or disbales the Dynamic DNS service for the access point.
username Enter a 1 - 32 character username for the account used for the access point.
password Enter a 1 - 32 character password for the account used for the access point.
hostname Enter a 1 - 32 character hostname for the account used for the access point.