Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 244)

230 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
For information on configuring VPN using the applet (GUI), see “Configuring VPN tunnels” on
page 151.
BR5181>admin(network.wan.vpn)> set
Description
Sets VPN entry parameters.
Syntax
set type Sets the tunnel type to Auto or Manual for the
specified tunnel name.
authalgo Sets the authentication algorithm for to (None,
MD5, or SHA1).
authkey Sets the AH authentication key (if type is Manual) for
tunnel with the direction set to IN or OUT, and
the manual authentication key set to . (The
key size is 32 hex characters for MD5, and 40 hex
characters for SHA1).
esp-type Sets the Encapsulating Security Payload (ESP) type.
Options include None, ESP, or ESP-AUTH.
esp-enc
algo Sets the ESP encryption algorithm. Options include
DES, 3DES, AES128, AES192, or AES256).
esp-enc
key Sets the Manual Encryption Key in ASCII for tunnel
and direction IN or OUT to the key .
The size of the key depends on the encryption
algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256
esp-auth
algo Sets the ESP authentication algorithm. Options include
MD5 or SHA1.
esp-auth
key Sets ESP Authentication key either for IN or
OUT direction to , an ASCII string of hex
characters. If authalgo is set to MD5, then provide 32
hex characters. If authalgo is set to SHA1, provide 40
hex characters.
spi Sets 6 character IN(bound) or OUT(bound) for AUTH
(Manual Authentication) or ESP for to (a
hex value more than 0xFF) .
usepfs Enables or disables Perfect Forward Secrecy for
.