Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 221)

Brocade Mobility 5181 Access Point Product Reference Guide 207
53-1002516-01
Network Commands
8
Example
admin(network.lan)>
admin(network.lan)>set lan 1 enable
admin(network.lan)>set name 1 engineering
admin(network.lan)>set ethernet-port-lan 1
admin(network.lan)>set timeout 45
admin(network.lan)>set trunking 1 disable
admin(network.lan)>set auto-negotiation disable
admin(network.lan)>set speed 100M
admin(network.lan)>set duplex full
admin(network.lan)>set dns 1 192.168.0.1
admin(network.lan)>set dns 2 192.168.0.2
admin(network.lan)>set wins 1 192.168.0.254
admin(network.lan)>set trunking disable
admin(network.lan)>set username phil
admin(network.lan)>set passwd ea0258c1
Related Commands
For information on configuring the LAN using the applet (GUI), see “Configuring the LAN interface”
on page 93.
duplex Defines the access point LAN port duplex as either half or full.
username Specifies the user name for 802.1x port authentication over the LAN
interface.
passwd The 0-32 character password for the username for the 802.1x port.
ip-mode Defines the Mobility 5181 Access Point LAN port IP mode.
ipadr Sets the IP address used by the LAN port.
mask Defines the IP address used for Mobility 5181 Access Point LAN port
network mask.
dgw Sets the Gateway IP address used by the LAN port.
domain Specifies the domain name used by the Mobility 5181 Access Point
LAN port.
dns Defines the IP address of the primary and secondary DNS servers used
by the LAN port.
wins Defines the IP address of the WINS server used by the LAN port.
show Shows the current settings for the Mobility 5181 Access Point LAN port.