Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 303)

Brocade Mobility 5181 Access Point Product Reference Guide 289
53-1002516-01
Network Commands
8
Network Router Commands
BR5181>admin(network.router)>
Description
Displays the router submenu. The items available under this command are:
BR5181>admin(network.router)> show
Description
Shows the access point route table.
Syntax
Example
admin(network.router)>show routes
----------------------------------------------------------------------------
index destination netmask gateway interface metric
----------------------------------------------------------------------------
1 192.168.2.0 255.255.255.0 0.0.0.0 lan1 0
2 192.168.1.0 255.255.255.0 0.0.0.0 lan2 0
3 192.168.0.0 255.255.255.0 0.0.0.0 lan1 0
4 192.168.24.0 255.255.255.0 0.0.0.0 wan 0
5 157.235.19.5 255.255.255.0 192.168.24.1 wan 1
Default gateway Interface : lan1
For information on configuring the Router options available to the access point using the applet
(GUI), see
“Configuring router settings” on page 128.
show Displays the existing Mobility 5181 Access Point router configuration.
set Sets the RIP parameters.
add Adds user-defined routes.
delete Deletes user-defined routes.
list Lists user-defined routes.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Shows the access point route table.