Clear-Com HX System Frames - Manual (Page 95)

Figure 56: Tera Term: selecting Serial Port
8. In the Serial port configuration dialog, enter the following settings:
Port setting Setting to enter
Port COM1 (Change to match a COM port present on the PC)
Baud rate 115200
Data 8 bit
Parity None
Stop 1 bit
Flow control none
Transmit delay 50 msec/char
Table 26: Tera Term port settings
9. Set the IP address of your PC to a fixed / static address (any IP address of your choice is
suitable).
10. Navigate to the c:\tftp directory. To open the TFTP Server command window, double click the
application tftpsrv.exe.
Figure 57: TFTP Server Window
Note:
The TFTP application can only access files in the same folder as the TFTP application. The
E-QUE firmware file must be in the same directory as the tftpsrv.exe program.
88 Eclipse HX Upgrade Guide