2 upgrading from 7.0, Upgrading from 7.0 – Clear-Com HX System Frames User Manual
Page 19
3.2 Upgrading from 7.0
The following table lists the procedures that you will require to upgrade from Eclipse HX v7.0 to Eclipse HX v7.5.
Important note:
The table lists the procedures in the order in which they must be carried out.
To go to a procedure, click the cross-reference / link.
Order
System component
Upgrade procedure(s)
Notes
1
EHX configuration software
Backing up your EXH 7.0/7.1 configurations
4.4 Importing your configurations into EHX
2
CPU card
5.7 Upgrading CPU Card U53 CPLD
5.8 Upgrading CPU Card U1 CPLD
5.9 Upgrading the CPU card U53 CPLD code with Xilinx tools
5.10 Upgrading the CPU card U1 CPLD code with Xilinx tools
3
E-QUE card
IVC-32 card
LMC-64 card
9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade E-
QUE cards to Eclipse HX v7.5 can
also be used to upgrade IVC-32 and
LMC-64 cards.
No FPGA or PROM upgrade is
required
12
Eclipse HX Upgrade Guide