Clear-Com HX System Frames User Manual
Page 101
Figure 61: Tera Term: selecting Serial Port
8. In the Serial port configuration dialog, enter the following settings:
Port setting
Setting to enter
Port
COM1 (Change to match a COM port present on the PC)
Baud rate
115200
Data
8 bit
Parity
None
Stop
1 bit
Flow control
none
Transmit delay
50 msec/char
Table 28: Tera Term port settings
9. Set the IP address of your PC to a fixed / static address (any IP address of your choice is
suitable).
10. Navigate to the c:\tftp directory. To open the TFTP Server command window, double click the
application tftpsrv.exe.
Figure 62: TFTP Server Window
Note:
The TFTP application can only access files in the same folder as the TFTP application. The
E-QUE firmware file must be in the same directory as the tftpsrv.exe program.
94
Eclipse HX Upgrade Guide