Clear-Com HX System Frames - Manual (Page 60)

5. The Serial port configuration dialog is displayed. Configure the serial port as follows:
Field Data (to enter / select)
Port Com1
Note:
Change as required to match a COM port on the PC.
Baud Rate 115200
Parity Even
Stop One (bits)
Data 8 (bits)
Table 14: Tera Term: Serial port configuration
Tip: The Tera Term application can be used for many of the Eclipse system upgrade
processes. You can save and recall the relevant com port settings in Tera Term by selecting
the Setup / Save or Restore settings options.
6. Connect the PC serial port to the RS232 port to the front of the Eclipse HX-PiCo matrix.
7. Power off the matrix. To access the CPU, remove the lid from the matrix.
Remove power from the device first, to avoid working with the system while it
is live. Observe all electrical shock hazard warning and precautions for
handling electrostatic sensitive devices.
53 Eclipse HX Upgrade Guide