Clear-Com HX System Frames - Manual (Page 50)

2. Ensure that the Eclipse HX-PiCo is powered off. Remove the lid of the device.
Remove power from the device first, to avoid working with the system while it
is live. Observe all electrical shock hazard warning and precautions for
handling electrostatic sensitive devices
3. Ensure that the PROM device to be programmed / upgraded is empty.
4. Program the PROM device with the appropriate file, in accordance with the instructions for the
PROM device.
5. Confirm that the checksum of the programmed device matches that given in the
Eclipse HX Release Notes (for this documentation, see the Eclipse HX v7.5 software DVD).
6. Remove the existing PROM device from the main board.
7. Insert the newly programmed PROM device, taking care to ensure the correct polarity of the
device.
1. Eclipse HX-PiCo Main Board
Figure 27: Eclipse HX-PiCo main board
8. Replace the lid of the Eclipse HX-PiCo device.
43 Eclipse HX Upgrade Guide