Clear-Com HX System Frames - Manual (Page 127)

To upgrade panel application code using EHX:
1. Ensure that you have the following equipment:
Required equipment Description / comments
PC with an Ethernet or serial
communications port -
EHX software EHX must be installed and configured.
EHX configuration file / map -
Ethernet or serial cable for the
PC-to-matrix connection -
Appropriate *.fwp format panel
application
The appropriate *.fwp format panel code is available
from the software DVD:
Software DVD > Panel Software >
Table 35: Required equipment
2. Start EHX on the PC.
3. Connect the PC to the matrix using either Ethernet or serial communications port.
4. Open the EHX configuration map within EHX.
5. Select System > Layout.
6. Right click the matrix and then select Firmware> Update Firmware.
7. The update firmware wizard dialogue is displayed. Click Next and ensure that the Panel radio
button is selected.
In Options:
• Selecting Automatic mode forces panels to upgrade automatically.
• Selecting Panel Prompt mode means that each panel user will be asked to accept /
decline the panel upgrade.
120 Eclipse HX Upgrade Guide