beautypg.com

Clear-Com HX System Frames User Manual

Page 117

background image

2. Install the Renesas Flash Development Toolkit (FDT), which is available from either of the

Eclipse HX v7.5 DVDs:

Software DVD > 3rd_Party_Software > RenesasFDT

Hardware DVD > 3rd_Party_Software > RenesasFDT

Accept the default install settings.

3. Start the Renesas Flash Development Toolkit (FDT) from Programs, selecting the basic

Startup option.

4. Access the configuration (settings) dialogs, by selecting Options > New Settings...

Configure the FDT, as shown in the table below:

Settings dialog / option

Setting to enter


Select Device


H8S/2318F

Select Port

COM1 (Change to match a COM port present on the PC)

CPU Frequency

25.0 Mhz

Connection

Boot mode

Recommended Speed

38400 (Deselect the Use-Default option)

Protection

Automatic

Messaging

Advanced

User Area

Selected (Checked)

Readback verification

Yes

Table 32: FDT settings

Note:

The first time the FDT is run, the settings dialogs are displayed by default. After the FDT has
been configured, the settings dialogs are no longer shown by default.

5. In the Download window, click Options and ensure that:

Auto-Disconnect is selected (checked).

• The Download File radio button is selected.

110

Eclipse HX Upgrade Guide

This manual is related to the following products: