beautypg.com

5 setting the matrix type, Setting the matrix type, Setting the matrix – Clear-Com HX System Frames User Manual

Page 39: Type

background image

y

5.5 Setting the matrix type

The Eclipse HX-Median, Eclipse HX-Omega and Eclipse HX-Delta matrices run common software,
which means that when you upgrade the application code for the CPU card, the CPU card cannot
automatically distinguish between the two matrix types. You must therefore set the matrix type in
EHX.

Note:

The Eclipse HX-PiCo runs its own matrix-specific software, and will always identify itself as an Eclipse
HX-PiCo on hardware discovery. There is therefore no requirement to set the matrix type for the
Eclipse HX-PiCo.

To set the matrix type:

1. In EHX, select Diagnostics > Event Log.

2. In the Matrix Event Log tab, Click the Play icon [ ].

3. Click Request info. In the dialog (see Figure 20: Setting the matrix type), enter the

following custom command:

Custom 145.1.12096. <2 == Eclipse HX-Median, 3 == Eclipse HX-Omega,

4 == Eclipse HX-Delta>


Click Send.

Figure 20: Setting the matrix type

32

Eclipse HX Upgrade Guide

This manual is related to the following products: