Clear-Com HX System Frames User Manual
Page 140
6. Before loading the new application code (*.s19 format file), you must erase the Flash ROM on
the E-station.
Press in the 2 key on the PC keyboard and press Enter, a message is displayed indicating
Flash Erasing – Please wait.
After the Flash ROM is erased, a message is displayed asking you to Download S-record
file now.
Figure 100: Erasing Flash ROM
7. In File, select the Send File. This prompts the user to browse for the correct E-Station *.s19
file for download to the unit undergoing the firmware upgrade:
Software DVD > Panel Software > I-Series > xxxxxxZ-E-Station App
Where xxxxxxZ represents the product number.
8. When you have selected the E-Station *.s19 file, select Open to start the s19 file download
process to the E-station Flash ROM.
Note:
The download process take several minutes to complete.
9. When the download process is complete Tera-Term will display the message on the PC
Download Success!
Exit Tera Term and reboot the E-station out of maintenance / update mode.
Press 9 on the PC keyboard and then Enter. The E-station begins its reset process.
Note:
When the reset process is underway, the display modules briefly display the updated
firmware version. If the E-station is re-connected to an Eclipse matrix with a valid
configuration press keypad button 9 to access the updated firmware/rack code version.
133
Eclipse HX Upgrade Guide