Clear-Com HX System Frames - Manual (Page 14)

6. Open the door. Insert the latch (a separate item from the door unit) into the latch
receptacle on the chassis.
The latch receptacle is located to the bottom left of the area enclosed by the door.
Note:
Leave the white plastic protector on the latch when you insert the latch into the
receptacle.
Figure 7: Inserting the latch into the latch receptacle
7. To expose the adhesive surface of the latch, remove the green film from the back of the
latch.
8. Close the door. Press down firmly on the bottom left of the door, so that the latch
adheres firmly to the latch-mount surface inside the door.
Latch
receptacle
Latch
6
7 Eclipse HX Upgrade Guide