Clear-Com HX System Frames - Manual (Page 83)

Figure 46: MVX-A16 card: J1, CON8 and CON12
7.2 Checking the MVX-A16 boot and application code
version
You can check the MVX-A16 boot and application code versions by going to EHX> Matrix Event Log
> Matrix Overview.
You can also use the Firmware report tool in EHX to confirm the application code version. To use the
Firmware report tool:
4. Go to EHX> System> Layout.
5. Right click the matrix icon.
6. Select Firmware > Firmware report.
To check the firmware version using Tera Term:
1. Install Tera Term. Tera Term is available to install from both of the Eclipse HX 7.5 DVDs:
• Software DVD > 3rd_Party_Software > Teraterm
• Hardware DVD > 3rd_Party_Software > Teraterm
2. Open Tera Term and select the following port settings:
Port setting Setting to enter
Port COM1 (Change to match a COM port present on the PC)
CON8 J1 CON12
76 Eclipse HX Upgrade Guide