Clear-Com HX System Frames - Manual (Page 16)

3 Quick reference: Upgrading to Eclipse HX v7.5
The upgrade kit includes a hardware DVD, containing the latest firmware files (including Boot and FPGA / CPLD code files) for your Eclipse HX devices. It
also includes a software DVD, containing the application code files for your Eclipse HX devices. It also includes the EHX configuration software, Production
Maestro Pro audio routing software, and Eclipse HX v7.5 documentation. You require both DVDs to complete a full system upgrade. For more information,
see 2.1.3 Supplied DVDs.
3.1 Upgrading from 5.2.4
The following table lists the procedures that you will require to upgrade from ECS v5.2.4 to Eclipse HX v7.5.
Important note:
The table lists the procedures in the order in which they must be carried out. To go to a procedure, click the cross-reference / link.
Order System component Upgrade procedure(s) Notes
1 EHX configuration software 4.1 Backing up your ECS v5.2.4 configurations
4.3 Installing EHX
4.4 Importing your configurations into EHX
2 CPU card 5.1 Changing the CPU card PROM
5.2 Changing the CPU card RAM
5.3 Changing the CPU card DIP switches
5.4 Upgrading the CPU card application code
Setting the matrix type
The PROM and RAM are supplied as
part of the HX-Upgrade kit.
You must set the matrix type in EHX
(to either the Eclipse HX-Median, the
Eclipse HX-Omega or the Eclipse HX-
Delta) after upgrading the CPU card
application code
9 Eclipse HX Upgrade Guide