Xilinx tools ) – Clear-Com HX System Frames User Manual
Page 105
9.4 Upgrading the E-QUE card (MK1 and MK2) FPGA with
Xilinx tools
Note:
Upgrading the E-QUE card FPGA using Xilinx tools requires specialized equipment. For more
information about the Xilinx programming tools, see Appendix I:Xilinx tools.
To upgrade the E-QUE card FPGA code with Xilinx tools:
1. Ensure that the latest versions of the Xilinx programming tools have been installed.
Tip:
For more information about installing Xilinx programming tools, see
1. Connect the USB connector of the download cable (Platform cable USB DLC9G) to the USB
port of the PC.
2. Connect the 14way IDC header to CON3100.
3. Power up the UUT and start the iMPACT programming tool.
4. In Load Project, select Cancel.
5. In Flows, double click Boundary Scan. Right click the main window and select
Initialise Chain / Ctrl+ I:
Figure 68: iMPACT Boundary Scan
98
Eclipse HX Upgrade Guide