beautypg.com

Clear-Com HX System Frames User Manual

Page 133

background image

2. Connect the converter cable to the expansion out RJ-45 port (J1) on the I-Series undergoing

the upgrade.

If the cable has separate I-Series and E-station CAT5 cables, the I-Series CAT5 cable is used
for the connection to J1 on the I-Series. Connect the other end of the cable to the serial port
of the PC running the Tera Term software.

Note:

The I-Series panel must not be powered while the cable is connected.

Figure 89: I-Series (I-Station) manual upgrade

3. Start Tera Term.


Configure Tera Term for the appropriate COM port on the PC, as shown in the following
figure.

Select the Serial radio button and then the correct COM port setting for the PC from the Port
drop-down menu. Click OK.

Figure 90: Tera Term: COM port setting

126

Eclipse HX Upgrade Guide

This manual is related to the following products: