Clear-Com HX System Frames - Manual (Page 151)

3. Power up the TEL-14.
4. Start Flash Magic. Configure the following settings for the 5 purple numbered boxes in the
Flash Magic dialog:
Box Setting(s) to enter
1 The COM port to which you are connected.
Baud Rate: 2400
Device: 89LPC935
Oscillator Frequency: 3.5795 MHz
2 Select Erase blocks used by Hex File
3 Enter the name of the file (710756Z .hex) to be loaded, or use Browse to
locate the file.
4 Ensure all boxes are clear
5 Do not press Start.
Table 41: FlashMagic settings
Figure 111: FlashMagic configuration dialog
5. In the menu options along the top of the Flash Magic dialog, select ISP (second option from
the left).
From the drop-down menu, select Start Bootloader.
144 Eclipse HX Upgrade Guide