Clear-Com HX System Frames - Manual (Page 24)

4.3 Installing EHX
EHX is the configuration software for Eclipse HX v7.5. The Eclipse HX v7.5 software DVD contains a
number of executable (*.exe) files for installing EHX:
Installation (*.exe) file Description and comments
EHXSetup.exe The installer for the client version of EHX (both 32 and 64 bit
machines). You can use the EHX Client version to connect:
• Directly to a matrix in Client-only mode.
• To an EHX Server in Client-Server mode.
EHXServerSetup.exe The installer for the server version of EHX (both 32 and 64 bit
machines).
The EHX Server enables multiple EHX clients to work together
when configuring an Eclipse HX system.
Table 5: Installing EHX
Note:
If you are required to uninstall and re-install EHX for any reason, ensure to save your configurations
for re-importing into EHX (see section below). You can uninstall EHX from your Windows
All Programs menu.
EHX uninstall will stop and restart IIS during the uninstall process to remove any files that are
currently in use.
4.4 Importing your configurations into EHX
The procedure below is only applicable if you are running EHX in Client-Server mode.
Tip: Remember to import any control macros which may be associated with a configuration.
To import a saved configuration from ECS v5.2.4 into EHX:
1. Open EHX. From the top menu bar, select File > Import Project.
2. Navigate to the ECS v5.2.4 configuration ( *.ccn) file saved to your hard drive. To import the
file, click Open.
Note:
EHX can open *.ccn format files as well as its own *.hxn format configuration files.
To import a saved project from an earlier version of EHX or ECS into EHX in Client-only mode:
1) Open EHX. Select File > Open.
2) Navigate to the project file (*.hxn or *.ccn format) saved to your hard drive. Click Open.
Note: If you import a .ccn file, remember to save your imported project as an *.hxn
format file.
Repeat the above procedure for all the configurations you want to import.
17 Eclipse HX Upgrade Guide