Clear-Com HX System Frames - Manual (Page 54)

5. Do one of the following:
• If you are running EHX in Client-Server mode, select File > Import project.
Navigate to the configuration ( *.ccn) file and click Open to import the file.
• If you are running EHX in Client-Only mode, select File > Open. Navigate to the
configuration (*.ccn) and open the file.
Note:
EHX can open *.ccn format files as well as its own *.hxn format configuration files.
5. In EHX, select System > Layout. In the work area, right click the Eclipse HX-PiCo.
6. From the menu, select Firmware > Update Firmware.
Figure 30: Upgrading app code: Matrix firmware update
7. In the Firmware update wizard, click Next. Ensure that Matrix is selected in the following
dialog, then click Next again.
8. In the next dialog, click Browse and navigate to the required *.fwr file for the Eclipse HX-PiCo
application:
a. Go to Software DVD > Eclipse HX-PiCo > xxxxxZ – Application (where xxxxxxZ
represents the part number).
The folder contains the *.fwr file and a Read Me file (*.txt) with version information.
b. Select the*.fwr file and click OK / Open. Ensure that the correct file name is
displayed in the dialog.
9. Click Next. Confirm that the correct file has been selected, and click Next again to start the
firmware update. The update will take approximately 2 minutes.
Tip: While the update is in progress, check that the LED on the front of the Eclipse HX-PiCo
is flashing rapidly. Rapid flashes indicate communication with the PC.
47 Eclipse HX Upgrade Guide