Clear-Com HX System Frames - Manual (Page 153)

15 Upgrading the AES-6 module
This chapter describes how to upgrade the application code of the AES-6 interface module.
Before attempting any upgrade of the AES-6 card, ensure that anti static precautions are taken, as
the Eclipse HX devices are sensitive to static discharges.
Observe all electrical shock hazard warning and precautions for handling
electrostatic sensitive devices
Note:
This guide is laid out in the order in which you must upgrade your Eclipse HX software and hardware
devices. For a quick reference to upgrading your system, see
3 Quick reference: Upgrading to Eclipse HX.
To upgrade the AES-6 application code:
1. Ensure you have the following equipment:
Required equipment Description / comments
PC with a serial port A USB-to-serial adapter is usually acceptable.
CellCom / FreeSpeak
(FSBP) registration cable
PD4007Z, DB-9 to 3.5mm jack.
The appropriate AES-6
application code file
(*.mot file) The AES-6 application code (*.mot format file) is available
from the software DVD:
Software DVD > Other_Software > xxxxxxZ - AES-6
Application (where xxxxxxZ represents the product number)
Hitachi Renesas Flash
Development Toolkit
(FDT)
Third party software is available from either of the Eclipse HX
7.5 DVDs:
• Software DVD > 3rd_Party_Software > Hitachi_FDT
• Hardware DVD > 3rd_Party_Software > Hitachi_FDT
Tip: For more information about installing the Hitachi Renesas
FDT, see Appendix D:Hitachi Renesas Flash Development
Tool.
Table 42: Required equipment
146 Eclipse HX Upgrade Guide