Clear-Com HX System Frames User Manual
Page 118
6. Select ‘…’ for the User area and select the appropriate *.mot format file for the E-MADI64 H8
boot code.
The EMADI64 boot code file is available from the hardware DVD:
Hardware DVD > Eclipse HX-Omega-Median-Delta > xxxxxxZ-E-MADI Boot (where
xxxxxxZ represents the product number).
7. On the E-MADI64 card to be updated, ensure that jumper J1000 is made.
Figure 80: E-MADI64 PCB (upper right hand corner)
8. Connect the MVX serial cable (
CAB-MVX-48Z) between the COM port on the PC and the
CON1001 on the E-MADI64 card to be updated.
See Figure 80: E-MADI64 PCB (upper right hand corner) above.
Note:
The E-MADI64 connection is polarized to ensure a correct connection.
9. Insert the E-MADI64 card into the Eclipse HX-Median / Eclipse HX-Omega / Eclipse HX-Delta
matrix (having ensured that the matrix is powered on).
111
Eclipse HX Upgrade Guide