Clear-Com HX System Frames User Manual
Page 58
6.4.3 Upgrading the Eclipse HX-PiCo application code using
Tera Term
To upgrade the Eclipse HX-PiCo application code using Tera Term:
1. Ensure that you have the following equipment:
Required equipment
Description / comments
PC with either a serial port
connection or USB-to-serial port
adaptor
If using a USB-to-serial port adaptor cable, you must
connect the cable before starting EHX to enable EHX
to detect the USB port as a COM port.
RS232 serial cable
Use a RS232 cable with DB-9 to 3.5mm jack
connectors (a CellCom / FreeSpeak (FSBP)
registration cable
(PD4007Z)).
Tera Term installation
Tera Term must be configured and operational. You
can find the Tera Term application on both of the
Eclipse HX 7.5 DVDs:
Software DVD > 3rd_Party_Software > Teraterm
Hardware DVD > 3rd_Party_Software > Teraterm
The appropriate *.fwr data file for
the Eclipse HX-PiCo application
You can find the *.fwr data file on the software DVD
at:
Software DVD > Eclipse HX-PiCo > xxxxxxZ –
Application (where xxxxxxZ represents the part
number).
Table 13: Required equipment
2. Install the Tera Term application. Accept all default settings.
51
Eclipse HX Upgrade Guide