3 changing the cpu card dip switches, Changing the cpu card dip switches – Clear-Com HX System Frames User Manual
Page 28
4. Fit the replacement 256Mb CPU card RAM daughter board to the cassette. The daughter
board is fitted chip-side up.
Ensure that the daughter board is securely fitted (only the top edge of the connectors along
the lower edge of the board should be visible).
Figure 10: CPU card 256Mb RAM daughter board
5. Secure the RAM daughter board by closing the levers to either side of the cassette.
6. Return the CPU card to the Eclipse HX-Median, Eclipse HX-Omega or Eclipse HX-Delta
matrix.
5.3 Changing the CPU card DIP switches
To change the CPU card DIP switches to the appropriate Eclipse HX v7.5 settings, see either:
• Appendix B: CPU card DIP switches
• 5.4.3 Upgrading the CPU Card application code
21
Eclipse HX Upgrade Guide