Clear-Com HX System Frames - Manual (Page 155)

15.1.1 Upgrading AES-6 FPGA
Before attempting any upgrade of the AES-6 card, ensure that anti static precautions are taken, as
the Eclipse items are sensitive to static discharges.
Observe all electrical shock hazard warning and precautions for handling
electrostatic sensitive devices
Tip: For help with selecting the other procedures you require for upgrading to EHX V5.2.4, see the
quick reference procedures tables in 2 Selecting Upgrade Procedures.
To upgrade the AES-6 FPGA:
1. Ensure you have the following equipment:
Required equipment Description / comments
PC with a serial port A USB-to-serial adapter is usually acceptable.
CellCom / FreeSpeak (FSBP)
registration cable
PD4007Z, DB-9 to 3.5mm jack.
The appropriate AES-6 FPGA
code file
The AES-6 FPGA code is available from the hardware
DVD:
Hardware DVD > Other_Software > xxxxxxZ - AES-6
FPGA (where xxxxxxZ represents the product number)
Tera Term terminal software
Third party software is available from either of the Eclipse
HX 7.5 DVDs:
Software DVD > 3rd_Party_Software > Teraterm
Hardware DVD > 3rd_Party_Software > Teraterm
Tip: For more information about installing Tera Term, see
Appendix F: Tera Term
Table 44: Required equipment
2. Fit the AES-6 card to a parent unit.
148 Eclipse HX Upgrade Guide