beautypg.com

Siemens TC63 User Manual

Page 97

background image

TC63 AT Command Set

4.7 AT+IFC

s

TC63_ATC_V00.490

Page 97 of 501

5/24/05

Confidential / Draft - Do not copy

Notes

• When using XON/XOFF flow control (

AT+IFC

=1,x or

AT+IFC

=3,x) in data mode,

+++

should not be used

while the data transmission is paused with XOFF. Before entering the command mode with

+++

the paused

transmission should be resumed using the XON character.

• For compatibility reasons, the

AT+IFC

command can be used in Multiplex mode, though the settings will not

take effect. However, be aware that whenever you use the

AT+IFC

write command in Multiplex mode and

then save the current configuration to the user profile with

AT&W

, the changed

AT+IFC

setting will become

active after restart.