Siemens TC63 - Manual (Page 168)

TC63 AT Command Set
7.22 AT^SLCC
s
TC63_ATC_V00.490 Page 168 of 501 5/24/05
Confidential / Draft - Do not copy
state of the call
0
active
1 held
2 dialing (MOC)
3 alerting (MOC)
4 incoming (MTC)
5 waiting (MTC)
6 terminating: The call is not active anymore, but inband information is still avail-
able.
7 dropped: The call has been suspended by the network, but may be resumed
later.
bearer/teleservice
0
voice
1 data
2 fax
3 voice followed by data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
4 alternating voice/data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
5 alternating voice/fax, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
6 voice followed by data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
7 alternating voice/data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
8 alternating voice/fax, fax mode (only in connection with single numbering
scheme
AT+CSNS
)
9 unknown
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
0 No traffic channel is available to the call
1 mobile has been assigned a traffic channel.
It is now possible to send or receive inband information, e.g. to send DTMF
tones (cf.
AT+VTS
), or to receive network announcements.
phone number in format specified by
(num)
(num)
(num)
(num)
(str)