Siemens TC63 - Manual (Page 302)

TC63 AT Command Set
11.16 AT^SGCONF
s
TC63_ATC_V00.490 Page 302 of 501 5/24/05
Confidential / Draft - Do not copy
11.16 AT^SGCONF Configuration of GPRS related Parameters
Syntax
Parameter Description
The maximum number of octets in an information field of Unnumbered (U) frames.
0
no negotiation with network (500 will be used)
140...1520 (P) lower values diminish performance
The maximum number of octets in an information field of Combined Information (I) frames.
0
no negotiation with network (500 will be used)
140...1520 (P) lower values diminish performance
GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR:
operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test
command. The value set is volatile and powerup value is the maximum allowed.
Notes
• +CME ERROR: invalid index: Parameter is out of range
• +CME ERROR: operation temporary not allowed: The command is blocked as long as GPRS is already in
use (as long as mobile is GPRS attached).
• Writing to user profile with
AT&W
and restoring with
AT&F
are not supported.
Test Command
AT^SGCONF=?
Response(s)
^SGCONF:
(list of supported s), (list of supported s), (list of
supported es)
OK
Read Command
AT^SGCONF?
Response(s)
^SGCONF:
, ,
OK
Write Command
AT^SGCONF=
[ ][, [ ][, [ ]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS ! % % % % % % ! % !
(num)
(num)
(num)