Siemens TC63 - Manual (Page 81)

TC63 AT Command Set
3.4 AT+CEER
s
TC63_ATC_V00.490 Page 81 of 501 5/24/05
Confidential / Draft - Do not copy
3.4.4 GSM release cause for L3 Call Control (CC)
12 Location Area not allowed
13 Roaming not allowed in this location area
Causes related to PLMN specific network failures and congestion
17
Network failure
22 Congestion
Causes related to nature of request
32
Service option not supported
33 Requested service option not subscribed
34 Service option temporarily out of order
38 Call cannot be identified
Causes related to invalid messages
95
Semantically incorrect message
96 Invalid mandatory information
97 Message type non-existent or not implemented
98 Message not compatible with protocol state
99 Information element non-existent or not implemented
100 Conditional information element error
101 Messages not compatible with protocol state
111 Protocol error, unspecified
Causes related GPRS
7
GPRS services not allowed
8 GPRS services not allowed in combination with non-GPRS services
9 MS identity cannot be identified by the network
10 Implicitly detached
14 GPRS services not allowed in current PLMN
16 MSC temporarily unreachable
Number Description
0 No error
Normal class
1
Unassigned (unallocated) number
3 No route to destination
6 Channel unacceptable
8 Operator determined barring
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
21 Call rejected
Number Description