Siemens TC63 - Manual (Page 225)

TC63 AT Command Set
9.9 AT+CLIP
s
TC63_ATC_V00.490 Page 225 of 501 5/24/05
Confidential / Draft - Do not copy
Parameter Description
[0] (&F) suppress unsolicited result codes
1 display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
string type phone number of calling address in format specified by
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
string type alphanumeric representation of corresponding to the entry found in phonebook; used
character set should be the one selected with command Select TE Character Set
AT+CSCS
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of originating
network. shall be an empty string ("") and value will not be
significant.
When CLI is not available ( =2), shall be an empty string ("") and value
will not be significant. Nevertheless, TA shall return the recommended value 128 for (TON/NPI
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator, (
=1) and the CLIP is provisioned with the
"override category" option (refer GSM 02.81 and GSM 03.81), and is provided. Otherwise,
TA shall return the same setting for and as if the CLI was not available.
(num)(&W)(&V)
(num)(&V)
(str)
(num)
(str)
(num)