Siemens TC63 - Manual (Page 34)

TC63 AT Command Set
2.3 AT&W
s
TC63_ATC_V00.490 Page 34 of 501 5/24/05
Confidential / Draft - Do not copy
2.3 AT&W Stores current configuration to user defined profile
AT&W
stores the currently set parameters to a user defined profile in the non-volatile memory.
Syntax
Parameter Description
[0] Number of profile
Notes
• The user defined profile will be restored automatically after power-up. Use
ATZ
to restore user profile and
AT&F
to restore factory settings. Until the first use of
AT&W
,
ATZ
works as
AT&F
.
•
AT&W
stores all global settings and the current local settings of the interface, on which the command is exe-
cuted.
• A list of parameters stored to the user profile can be found in Section 21.5 ,
AT Command Settings stor-
able with AT&W
.
Exec Command
AT&W
[ ]
Response(s)
OK
ERROR/+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 ! % % % % % % ! % !
(num)