Siemens TC63 - Manual (Page 179)

TC63 AT Command Set
8. Network Service Commands
s
TC63_ATC_V00.490 Page 179 of 501 5/24/05
Confidential / Draft - Do not copy
8. Network Service Commands
The AT Commands described in this chapter are related to various network services. More commands related
to this area can be found in Chapter 9. , Supplementary Service Commands .
8.1 AT+COPN Read operator names
The
AT+COPN
command returns the list of operator names from the ME. Each operator code that
has an alphanumeric equivalent in the ME memory is returned. See also:
AT^SPLM
.
Syntax
Parameter Description
Operator in numeric format; GSM location area identification number.
Operator in long alphanumeric format; can contain up to 16 characters.
Test Command
AT+COPN=?
Response(s)
OK
ERROR
+CME ERROR
Exec Command
AT+COPN
Response(s)
+COPN:
,
+COPN:
...
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 % % % % % % % ! % !
(str)
(str)