7 at^smond cell monitoring, At^smond cell monitoring, Tc63 at command set – Siemens TC63 User Manual
Page 190
TC63 AT Command Set
8.7 AT^SMOND
s
TC63_ATC_V00.490
Page 190 of 501
5/24/05
Confidential / Draft - Do not copy
8.7
AT^SMOND Cell Monitoring
The
execute command can be used to obtain status information of the service cell and up to six neigh-
bour cells. The advantage over other cell monitoring commands is that
delivers more detailed infor-
mation about the received signal strength.
Syntax
Parameter Description
Serving cell information (comma-separated, no cr/lf included)
,
,
,
,
,
,
If no serving cell is found, unavailable values are omitted:" ,,,,,,
,,,0,,,0"
Neighbour cell information for neighbour cell 1 through 6 (comma-separated, no cr/lf included)
1
,
,
,
1
,
,
1
, (these parameters repeated for neighbour
cells 2 through 6 with no CR/LF): ...
6
,
6
An unavailable cell appears as follows: " ,,,,,,0"
Values for RSSI and BER (comma-separated, no cr/lf included)
Mobile country code
3 digits, e.g. 232
000
Not decoded
Test Command
AT^SMOND=?
Response(s)
OK
ERROR
+CME ERROR
Exec Command
AT^SMOND
Response(s)
^SMOND:
][,
][,
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS, 3GPP TS 05.08
%
%
%
%
%
%
%
!
!
!
(str)
(str)
(str)
(num)