Urcinfoid, Urccause, Urcinfotext – Siemens TC63 User Manual
Page 256: Lated to a, Tc63 at command set
TC63 AT Command Set
10.3 AT^SISO
s
TC63_ATC_V00.490
Page 256 of 501
5/24/05
Confidential / Draft - Do not copy
URC cause identifier.
0
An error has occurred after opening or while using an Internet service.
, optionally additional information
may be supplied via
.
1
Indicates that an opened Socket listener service is receiving a connection
request from a remote client.
The incoming socket connection is dynamically assigned to the next free Inter-
net service profile. In this case, the parameter
inside the "
URC equals the
of the dynamically assigned service pro-
file. This ID shall be used to accept the connection request with
or to
reject it with
.
The connection status may be requested by using the
read com-
mand. Among other details, the response indicates the IP address of the
remote client (parameter
). This may be helpful to decide whether
to accept or reject the request.
2
Incoming Socket service client connection has failed.
The client request was rejected automatically because no free Internet service
profile was available.
3
HTTP only: Indicates that the message delivered by the "
" URC is pro-
vided for information only, it is not an error. For details refer to Info URCs in
Section
URC Information Elements Related to HTTP Service
Example: ^SIS: 2, 3, 2200, "HTTP Redirect to:192.168.1.3:800//products/info/"
Information identifier related to
.
See Section
Information Elements Related to Internet Service URCs
for further detail.
As stated above, if a Socket connection request from a remote client is received the
equals the
of the dynamically assigned free service profile.
Information text related to
.
See Section
Information Elements Related to Internet Service URCs
for further detail.
(num)
(num)
(str)