Siemens TC63 - Manual (Page 335)

TC63 AT Command Set
13.9 AT+CMSS
s
TC63_ATC_V00.490 Page 335 of 501 5/24/05
Confidential / Draft - Do not copy
13.9 AT+CMSS Send SMS messages from storage
Syntax
Command Description
The write command sends message with location value from message storage to the network
(SMS-SUBMIT or SMS-COMMAND). If new recipient address is given for SMS-SUBMIT, it shall be used
instead of the one stored with the message. Reference value is returned to the TE on successful message
delivery. Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter is given, the old status of the short message at remains unchanged
(see ).
Test Command
AT+CMSS=?
Response(s)
OK
Write Command
If text mode (
AT+CMGF
=1):
AT+CMSS=
[, [, ]]
Response(s)
+CMSS:
[, ]
OK
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (
AT+CMGF
=0):
AT+CMSS=
[, [, ]]
Response(s)
+CMSS:
[, ]
OK
If sending fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 % % % % % % % ! ! !