beautypg.com

5 ate enable command echo, Ate enable command echo, Tc63 at command set – Siemens TC63 User Manual

Page 93

background image

TC63 AT Command Set

4.5 ATE

s

TC63_ATC_V00.490

Page 93 of 501

5/24/05

Confidential / Draft - Do not copy

4.5

ATE Enable command echo

The

ATE

command determines whether or not the TA echoes characters received from TE during command

state.

Syntax

Parameter Description

[0]

Echo mode off

1

(&F)

Echo mode on

Note

• In case of using the command without parameter,

is set to 0.

Exec Command

ATE

[

]

Response(s)

OK

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

V.250

!

%

%

%

%

%

%

!

%

!

(num)(&W)(&V)

See also other documents in the category Siemens Hardware: