Siemens TC63 - Manual (Page 427)

TC63 AT Command Set
18.14 AT^SNFPT
s
TC63_ATC_V00.490 Page 427 of 501 5/24/05
Confidential / Draft - Do not copy
18.14 AT^SNFPT Set progress tones
AT^SNFPT
controls the Call Progress Tones generated at the beginning of a mobile originated call setup.
Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
Syntax
Parameter Description
0 Disables Call Progress Tones
1 (P) Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Test Command
AT^SNFPT=?
Response(s)
^SNFPT:
(list of supported s)
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT:
OK
Write Command
AT^SNFPT=
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS ! % % % % % % ! % !
(num)