Siemens TC63 - Manual (Page 313)

TC63 AT Command Set
12.3 AT+FRH
s
TC63_ATC_V00.490 Page 313 of 501 5/24/05
Confidential / Draft - Do not copy
12.3 AT+FRH Receive Data Using HDLC Framing
The
AT+FRH
command enables the TA to receive frames using the HDLC protocol and the modulation defined
in Section 12.1 , FAX parameters . An ERROR response code results if this command is issued while the modem
is on-hook.
Syntax
Note
• Used for Fax Class 1 only
Write Command
AT+FRH=
Response(s)
CONNECT
If error related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 ! % ! % % ! ! ! ! !