Siemens TC63 - Manual (Page 71)

TC63 AT Command Set
3.3 AT^SIND
s
TC63_ATC_V00.490 Page 71 of 501 5/24/05
Confidential / Draft - Do not copy
3.3 AT^SIND Extended Indicator Control
Designed for extended event indicator control
AT^SIND
• offers greater flexibility than the standard command
AT+CIND
,
• offers several extra indicators,
• can show the current status of all indicators supported by
AT+CIND
and
AT^SIND
,
• can be used to register or deregister the indicators of both commands,
• displays all indicator event reports via "
+CIEV
" URCs.
Presentation mode of the generated URCs is controlled via
AT+CMER
.
The
AT^SIND
read command provides a list of all indicators supported by
AT+CIND
and
AT^SIND
. Each indica-
tor is represented with its registration mode and current value.
The
AT^SIND
write command can be used to select a single indicator in order to modify its registration and to
view the current value.
Syntax
Test Command
AT^SIND=?
Response(s)
^SIND:
( , list of supported s)[, ( , list of supported s)[,
...]], (list of supported s)
OK
Read Command
AT^SIND?
Response(s)
^SIND:
, ,
[^SIND: , , ]
...
OK
ERROR
+CME ERROR:
Write Command
AT^SIND=
,
Response(s)
^SIND:
, ,
In case of: ="eons" and =2
^SIND:
, , , ,
In case of: ="nitz" and =2
^SIND:
, , , ,
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS ! % % % % % % ! % !