Siemens TC63 - Manual (Page 117)

TC63 AT Command Set
5.3 AT^SPIC
s
TC63_ATC_V00.490 Page 117 of 501 5/24/05
Confidential / Draft - Do not copy
EXAMPLE 3
This example shows that after successful SIM PIN1 authentication the counter of the
AT^SPIC
execute and
read command refers to SIM PIN2, i.e. it does not reflect the status of SIM PIN1. This may be a problem if
the user enters a wrong PIN1 and is not aware that the number of attempts left to enter SIM PIN1 is counted
down.
To avoid conflicts we recommend to use the
AT^SPIC
read and write commands rather than the execute com-
mand only. The read command clearly states the currently required password, and the write command may
be used to get the counter for a specific , in this case for example "P2".
at+cpin=4714
+CME ERROR: incorrect password
at^spic
^SPIC: 63
OK
+CREG: 0
at+cpin=1234
OK
+CREG: 2
+CREG: 1
The mobile ist properly registered to the network.
at+cpin?
+CPIN: READY
The
AT+CPIN
? read command confirms that SIM
PIN1 authentication was successful.
at^spic
^SPIC: 3
As SIM PIN1 authentication was successful, the
counter relates to SIM PIN2 and correctly indicates
that the user has 3 attempts to enter SIM PIN2.
OK
AT^SPIC?
Likewise, the read command notifies that the ME is
waiting for SIM PIN2.
^SPIC: SIM PIN2
OK
at+clck="SC",0,456789
First attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,456789
Second attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,456789
Third attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
+CREG: 0
SIM PIN1 authentication is no longer valid.
at^spic
^SPIC: 10
This time, after the SIM PIN1 code has been dis-
abled, the counter indicates the status of SIM PIN1
and notifies that 10 attempts are left to enter the SIM
PUK.