Siemens TC63 - Manual (Page 314)

TC63 AT Command Set
12.4 AT+FRM
s
TC63_ATC_V00.490 Page 314 of 501 5/24/05
Confidential / Draft - Do not copy
12.4 AT+FRM Receive Data
The
AT+FRM
command causes the TA to enter the receive mode using the modulation defined in Section 12.1 ,
FAX parameters . An ERROR response code results if this command is issued while the modem is on-hook.
Syntax
Notes
• Used for Fax Class 1 only
•
= 3 is not possible
Test Command
AT+FRM=?
Response(s)
(list of s)
OK
Write Command
AT+FRM=
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 ! % ! % % ! ! ! ! !