Siemens TC63 - Manual (Page 316)

TC63 AT Command Set
12.6 AT+FTH
s
TC63_ATC_V00.490 Page 316 of 501 5/24/05
Confidential / Draft - Do not copy
12.6 AT+FTH Transmit Data Using HDLC Framing
The
AT+FTH
command causes the TA to transmit data using HDLC protocol and the modulation mode defined
in Section 12.1 , FAX parameters . An ERROR response code results if this command is issued while the modem
is on-hook.
Syntax
Notes
• Used for Fax Class 1 only
• Only
= 3 is possible
Write Command
AT+FTH=
Response(s)
CONNECT
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 ! % ! % % ! ! ! ! !