Siemens TC63 - Manual (Page 90)

TC63 AT Command Set
4.2 AT&C
s
TC63_ATC_V00.490 Page 90 of 501 5/24/05
Confidential / Draft - Do not copy
4.2 AT&C Set circuit Data Carrier Detect (DCD) function mode
The
AT&C
command determines how the state of circuit 109 (DCD) relates to the detection of received line signal
from the distant end.
Syntax
Parameter Description
[0] DCD line is always ON
1 (&F) DCD line is ON in the presence of data carrier only
Exec Command
AT&C
[ ]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 ! % ! % % % % ! % !
(num)(&W)(&V)