Siemens TC63 - Manual (Page 37)

TC63 AT Command Set
2.6 ATX
s
TC63_ATC_V00.490 Page 37 of 501 5/24/05
Confidential / Draft - Do not copy
2.6 ATX Set CONNECT result code format and call monitoring
ATX
determines whether or not the TA detects the presence of dial tone and busy signal and whether or not TA
transmits particular result codes.
Syntax
Parameter Description
[0] CONNECT result code only returned, dial tone and busy detection are both dis-
abled.
1 CONNECT result code only returned, dial tone and busy detection are
both disabled.
2 CONNECT result code returned, dial tone detection is enabled, busy
detection is disabled.
3 CONNECT result code returned, dial tone detection is disabled, busy
detection is enabled.
4 (&F) CONNECT result code returned, dial tone and busy detection are both
enabled.
Exec Command
ATX
[ ]
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 ! % % % % % % ! % !
(num)(&W)(&V)