Siemens TC63 - Manual (Page 387)

TC63 AT Command Set
16.1 AT^SSTA
s
TC63_ATC_V00.490 Page 387 of 501 5/24/05
Confidential / Draft - Do not copy
Parameter Description
TC63 Remote-SAT interface states
0
RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
0 GSM character set
Input of a character requests one byte, e.g. "Y".
1 UCS2
To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte
string is required, e.g. "0059" is coding the character "Y". For details please
refer to ISO/IEC 10646.
0 SAT is already used on another instance (logical channel in case of the multi-
plex protocol). Only test and read commands can be used.
1 SAT may be started on this instance via the write version of this command.
SAT profile according to GSM 11.14 [24] .
The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli-
cation Toolkit implementation of the TC63.
1 Activate Remote-SAT
Note
• To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com-
mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com-
mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the
external application in this case, too.
(num)
(num)
(num)
(str)
(num)