5 atv set result code format mode, 1 verbose and numeric result codes, Atv set result code format mode – Siemens TC63 User Manual
Page 36: Verbose and numeric result codes, Tc63 at command set
TC63 AT Command Set
2.5 ATV
s
TC63_ATC_V00.490
Page 36 of 501
5/24/05
Confidential / Draft - Do not copy
2.5
ATV Set result code format mode
This command determines the contents of header and trailer transmitted with AT command result codes and
information responses. Possible responses are described in Section
Verbose and numeric result codes
.
Syntax
Parameter Description
[0]
Information response:
Short result code format:
1
(&F)
Information response:
Long result code format:
2.5.1
Verbose and numeric result codes
Exec Command
ATV
Response(s)
OK
ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250
!
%
%
%
%
%
%
!
%
!
(num)(&W)(&V)
Verbose format
Numeric format
Meaning
OK
0
Command executed, no errors
CONNECT
1
Link established
RING
2
Ring detected
NO CARRIER
3
Link not established or disconnected
ERROR
4
Invalid command or command line too long
NO DIALTONE
6
No dial tone, dialling impossible, wrong mode
BUSY
7
Remote station busy
CONNECT 2400/RLP
47
Link with 2400 bps and Radio Link Protocol
CONNECT 4800/RLP
48
Link with 4800 bps and Radio Link Protocol
CONNECT 9600/RLP
49
Link with 9600 bps and Radio Link Protocol
CONNECT 14400/RLP
50
Link with 14400 bps and Radio Link Protocol
ALERTING
Alerting at called phone
DIALING
Mobile phone is dialing