Configuration commands, At&f – Siemens TC63 User Manual
Page 30
TC63 AT Command Set
2. Configuration Commands
s
TC63_ATC_V00.490
Page 30 of 501
5/24/05
Confidential / Draft - Do not copy
2.
Configuration Commands
The AT Commands described in this chapter allow the external application to determine the TC63's behaviour
under various conditions.
2.1
AT&F Set all current parameters to manufacturer defaults
sets all current parameters to the manufacturer defined profile. All defined GPRS contexts which are not
activated or not online will be undefined (see
).
Syntax
Parameter Description
[0]
Set all TA parameters to manufacturer defaults
Notes
• List of parameters reset to manufacturer default can be found in Section
.
• In addition to the default profile, you can store an individual one with
. To alternate between the two pro-
files enter either
(loads user profile) or
(restores factory profile).
• Every ongoing or incoming call will be terminated.
Exec Command
AT&F
[
]
Response(s)
OK
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250
!
%
%
%
%
%
%
!
%
!
(num)