2 superscript notation for parameters and values, Superscript notation for parameters and values, Table 1.1 – Siemens TC63 User Manual
Page 17: Symbols used to mark the type of parameters, Table 1.2, Table 1.3, Tc63 at command set
TC63 AT Command Set
1.3 Document conventions
s
TC63_ATC_V00.490
Page 17 of 501
5/24/05
Confidential / Draft - Do not copy
1.3.2
Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type
Meaning
(num)
Parameter value must be numeric type
(str)
Parameter value must be string type
Parameter option
Meaning
(&W)
Parameter value will be stored with
(&V)
Parameter value will be displayed with
(ˆSNFW)
Parameter value will be stored with
(+CSCS)
Parameter value has to be (is) coded according to current setting of
(see
Value option
Meaning
[x]
Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically