Siemens TC63 - Manual (Page 460)

TC63 AT Command Set
20.4 ATS5
s
TC63_ATC_V00.490 Page 460 of 501 5/24/05
Confidential / Draft - Do not copy
20.4 ATS5 Write command line editing character
Syntax
Command Description
This parameter setting determines the character recognized by TA as a request to delete the immediately pre-
ceding character from the command line.
Parameter Description
command line editing character
000...8
(&F) ...127
Read Command
ATS5?
Response(s)
OK
Write Command
ATS5=
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 ! % % % % % % ! % !
(num)(&W)(&V)